ANST - combat archery

[Mark.S Harris]

harry billings wrote:
> 
> >On 11-22 Dore wrote
> >
> >You do realize that you cannot use hollow fiberglass from archery
> >shops, yes? You must use *solid* fiberglass rod. When it is solid
> >you want it as small as is legal (thus 1/4 inch) because every gram
> >you add costs you a chunk of range.
> >
> >Doré
> I made up two arrows and two crossbow bolts on 5/16 and the testing showed
> that they hit almost hard enough to be minimun rattan hits.
> Plachoya Sobaka a humble archer in Ravens Fort, Kingdom of Ansteorra

Are fiberglass shafts now legal for crossbow bolts?

I believe a good reason to use 5/16 shafts instead of 1/4 would be
because the heads you are using were sized for the bigger shaft
diameter. I think that would be safer than trying to use tubing or
tape to increase the shaft diameter. What do the rules say about
this?

Stefan li Rous
============================================================================
Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.