ANST - hardening steel
Carl Chipman
cchipman at nomadics.com
Tue Oct 24 14:35:02 PDT 2000
I was not needing something "Sir-Alexis-specific", I just knew he had some
of the answers I wanted after talking to him @ crown tournament....
I am wanting information on hardening 18 (and 20) gauge steel for many
differing armouring needs...
Thanks for the information, I'll check the florigium and see what it
says... :)
Jean Paul de Sens
Carl Chipman
Nomadics, Inc.
cchipman at nomadics.com
http://www.nomadics.com
On Tuesday, October 24, 2000 3:29 PM, Mark.S Harris
[SMTP:mark.s.harris at motorola.com] wrote:
> Lord Jean Paul de Sens asked:
> > Sir Alexis.
> >
> > If he (or anyone else) could get it to me I'd appreciate it as I had
some questions on hardening steel :)
>
> I'm not sure if you have questions that only he can answer or
> whether you are looking for general information and resources on
> hardening stee or just what.
>
> The specific techniques will vary a bit depending upon the
> composition of the steel you are using.
>
> If you are doing bladework, I have heard these books highly
> recommended:
> --------
> "THE COMPLETE BLADESMITH"
> "THE MASTER BLADESMITH"
> "THE PATTERN WELDED BLADE"
>
> All are in print and available from Paladin Press, P.O. Box 1307,
> Boulder
> Colorado, 80306, USA...
>
> Also my mailing address is:
>
> Dr. J.P. Hrisoulas
> Salamander Armoury
> 330 South Decatur, ste 109
> Las Vegas, NV 89017 USA.
> --------
>
> Here are some of the files in my Florilegium CRAFTS section that
> might be of use:
> bladesmithing-msg (49K) 4/ 5/00 Steel sources, making knives and
> swords.
> metals-msg (25K) 1/14/00 Medieval and modern metals and
> alloys.
> metal-sources-msg (10K) 6/ 7/99 Sources and merchants for metals.
> metalworking-FAQ (50K) 5/16/95 FAQ from the metalworking newsgroup.
> metalworking-msg (41K) 2/13/96 gauge thicknesses, inlays.
>
> My Florilegium files are on the web at: http://www.florilegium.org
>
> Lord Stefan li Rous
> stefan at texas.net
> ======================================================================
======
> Go to http://lists.ansteorra.org/lists.html to perform mailing list
tasks.
>
============================================================================
Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.
More information about the Ansteorra
mailing list