[Ansteorra] armors list
John
iaenmor at swbell.net
Wed Mar 4 13:38:35 PST 2009
16ga is .0625". However the currently used standards do allow for a
certain amount of leeway. Down to somewhere in the range you have
noted. You can bet the manufacturers are going to tread that bottom
line as closely as they can. One of the reasons for .0625 is not only
the thickness but also the weight. The more weight you have on your
head the less your brain is going to slosh around when it gets hit. A
very simple explanation of the physics of course. On the other hand if
the helm weights too much the opposite can occur. The helm starts
moving and the weight is too much for neck muscles to stop the
momentum. Leading to neck problems. Anyhow back to the original topic.
Iaen
Bill Perkins wrote:
> Also, the rules of the lyst specify 1/16th (0.0625) inch steel.
> According to my gauge equivalent chart, 16ga is 0.0598 inches thick
> for mild steel - much too thin. 15ga is the closest at 0.067 inches
> thick. However, 16ga stainless is at 0.063, which is sufficient.
>
> Alejandro
>
> ----- Original Message ----- From: "John" <iaenmor at swbell.net>
> To: <thundercavman at yahoo.com>; "Kingdom of Ansteorra - SCA, Inc."
> <ansteorra at lists.ansteorra.org>
> Sent: Wednesday, March 04, 2009 6:14 AM
> Subject: Re: [Ansteorra] armors list
>
>
>> Not so sure I would want to put a new fighter in a 16 gauge helm.
>> One place that comes highly recommended is Ironmonger Armoury.
>> http://www.ironmongerarmory.com/index.php?p=helms Scroll down the
>> page to his basic Bascinet. 125.00. Better price and heavier
>> steel. Known work and good quality for the price.
>> Iaen Mor
>>
>> hal johnson wrote:
>>> try swordsandarmor.com i just received my new helm from them 16 ga
>>> steel all the way around payed $195.that does include sales tax
>>> mailed it Friday received it like the following Tuesday good turn
>>> around time.also try ebay but i understand with the war coming a lot
>>> of sites are sold out .and the baron of treyloc has a armor with
>>> them now who makes some good stuff also yis ld harold graybear
>>>
>>> _______________________________________________
>>> Ansteorra mailing list
>>> Ansteorra at lists.ansteorra.org
>>> http://lists.ansteorra.org/listinfo.cgi/ansteorra-ansteorra.org
>>>
>>>
>> _______________________________________________
>> Ansteorra mailing list
>> Ansteorra at lists.ansteorra.org
>> http://lists.ansteorra.org/listinfo.cgi/ansteorra-ansteorra.org
>
> _______________________________________________
> Ansteorra mailing list
> Ansteorra at lists.ansteorra.org
> http://lists.ansteorra.org/listinfo.cgi/ansteorra-ansteorra.org
>
More information about the Ansteorra
mailing list