[Ansteorra] Combat Bolts
B Scott Mills
b.scott.mills at gmail.com
Fri Dec 17 20:27:33 PST 2010
We have done lots of tests and have 2000+ peices of ammo. The Goop
doesn't hold nearly as well as the Welder.
On 12/17/2010 10:23 PM, Jean Paul de Sens wrote:
> With the exception of your bore brush step, their instructions now include
> all of your additional steps, and they include a very good glue as well
> (Amazing Goop).
> Qui mieux fait, mieux vault.
> On Fri, Dec 17, 2010 at 7:00 PM, John<iaenmor at swbell.net> wrote:
>> Should work with a few minor changes to their instructions.
>> Lightly sand the end of the shafts.
>> Take a bore brush and scrub the APD really well.
>> Clean the shaft and the APD. Acetone works well.
>> Take a heated pin or very small drill bit and make a hole thru the side of
>> the APD at the bottom (near the nock). This will allow extra glue to squirt
>> out. It helps. Use a small rod or something like to figure out were the
>> end of the shaft hole is.
>> Put some glue in the front of the APD. You don't have to be stingy. We
>> recommend that you use Welder brand glue available at Wal Mart and other
>> stores. http://www.amazon.com/Welder-Contact-Adhesive/dp/B003E6ZPWA
>> Push the shaft into the APD. Clean up any extra glue or catch it and use
>> it on the next arrow. Do this over something that can get messy or cover
>> with newspaper or whatnot.
>> Set them aside and don't play with them for at least a week. The glue has
>> to dry and the fit is fairly tight so it takes a bit to dry properly.
>> Label them with your name, group and kingdom if they belong to you. Group
>> arrows/bolts need only the group name and kingdom. Someone should be
>> responsible for them in any case.
>> Iaen Mor
>> Company of Saint Sebastian
>> On 12/17/2010 3:05 PM, Eric W. Brown wrote:
>>> Hi all,
>>> Assuming I have the "complete kit" from Northstar, for combat bolts,
>>> Aside from building them per instructions and get them inspected before
>>> use, what other requirements are there
>>> For the bolts to be legal at Gulf?
>>> My understanding is we need to label them Name& kingdom with a sticker on
>>> the shaft.
>>> If the bolts are owned by a shire, is shire name good enough, or do we
>>> have to have a persons name on them?
>>> Basically I want to be sure they pass first time I cart them to an event.
>>> Ansteorra mailing list
>>> Ansteorra at lists.ansteorra.org
>>> In order to make changes and manage your account please go to:
>> Ansteorra mailing list
>> Ansteorra at lists.ansteorra.org
>> In order to make changes and manage your account please go to:
> Ansteorra mailing list
> Ansteorra at lists.ansteorra.org
> In order to make changes and manage your account please go to:
More information about the Ansteorra