[Ansteorra] pavilion stakes
HE Chiang Chi-sh h
chiang at clearwire.net
Tue Jan 31 22:27:40 PST 2012
Does sound like a good idea.
----- Original Message -----
From: "Stefan li Rous" <StefanliRous at austin.rr.com>
To: "Kingdom of Ansteorra - SCA, Inc." <ansteorra at lists.ansteorra.org>
Sent: Tuesday, January 31, 2012 11:58 PM
Subject: Re: [Ansteorra] pavilion stakes
> Thank you. Several folks have given some good, workable solutions. If I
> can find some clear tubing of the right size, this sounds like one of the
> easiest to do and should be retrofitable to the less-than- successful ones
> I've done with epoxy and Goop.
>
> Stefan
>
> On Jan 31, 2012, at 11:08 PM, Bree Flowers wrote:
>
>> I have used loose washers held in place by an inch or so of clear
>> tubing pushed up the stake below the washer. 5 years now with the same
>> set of stakes, so it does keep them together. Not the most attractive
>> solution, but you can't even see it when they're in the ground. And
>> let's face it, if you were going for looks, galvanized nails and
>> washers wouldn't be the first choice either ;)
>>
>> ~Eve
>
> --------
> THLord Stefan li Rous Barony of Bryn Gwlad Kingdom of Ansteorra
> Mark S. Harris Austin, Texas
> StefanliRous at austin.rr.com
> http://www.linkedin.com/in/marksharris
> **** See Stefan's Florilegium files at: http://www.florilegium.org ****
>
>
>
>
>
>
> _______________________________________________
> Ansteorra mailing list
> Ansteorra at lists.ansteorra.org
> In order to make changes and manage your account please go to:
> http://lists.ansteorra.org/listinfo.cgi/ansteorra-ansteorra.org
More information about the Ansteorra
mailing list