[Ansteorra] pavilion stakes

[Stefan li Rous]

Thank you. Several folks have given some good, workable solutions. If  
I can find some clear tubing of the right size, this sounds like one  
of the easiest to do and should be retrofitable to the less-than- 
successful ones I've done with epoxy and Goop.

Stefan

On Jan 31, 2012, at 11:08 PM, Bree Flowers wrote:

> I have used loose washers held in place by an inch or so of clear
> tubing pushed up the stake below the washer. 5 years now with the same
> set of stakes, so it does keep them together. Not the most attractive
> solution, but you can't even see it when they're in the ground. And
> let's face it, if you were going for looks, galvanized nails and
> washers wouldn't be the first choice either ;)
>
> ~Eve

--------
THLord Stefan li Rous    Barony of Bryn Gwlad    Kingdom of Ansteorra
    Mark S. Harris           Austin, Texas          StefanliRous at austin.rr.com
http://www.linkedin.com/in/marksharris
**** See Stefan's Florilegium files at:  http://www.florilegium.org ****