[Ansteorra] pavilion stakes

[HE Chiang Chi-sh h]

Does sound like a good idea.
----- Original Message ----- 
From: "Stefan li Rous" <StefanliRous at austin.rr.com>
To: "Kingdom of Ansteorra - SCA, Inc." <ansteorra at lists.ansteorra.org>
Sent: Tuesday, January 31, 2012 11:58 PM
Subject: Re: [Ansteorra] pavilion stakes


> Thank you. Several folks have given some good, workable solutions. If  I 
> can find some clear tubing of the right size, this sounds like one  of the 
> easiest to do and should be retrofitable to the less-than- successful ones 
> I've done with epoxy and Goop.
>
> Stefan
>
> On Jan 31, 2012, at 11:08 PM, Bree Flowers wrote:
>
>> I have used loose washers held in place by an inch or so of clear
>> tubing pushed up the stake below the washer. 5 years now with the same
>> set of stakes, so it does keep them together. Not the most attractive
>> solution, but you can't even see it when they're in the ground. And
>> let's face it, if you were going for looks, galvanized nails and
>> washers wouldn't be the first choice either ;)
>>
>> ~Eve
>
> --------
> THLord Stefan li Rous    Barony of Bryn Gwlad    Kingdom of Ansteorra
>    Mark S. Harris           Austin, Texas 
> StefanliRous at austin.rr.com
> http://www.linkedin.com/in/marksharris
> **** See Stefan's Florilegium files at:  http://www.florilegium.org ****
>
>
>
>
>
>
> _______________________________________________
> Ansteorra mailing list
> Ansteorra at lists.ansteorra.org
> In order to make changes and manage your account please go to:
> http://lists.ansteorra.org/listinfo.cgi/ansteorra-ansteorra.org