ARCH - Enough is enough

[Dewart, Charles R. --G3 Contractor (Anteon Corp)]

I wish I had one to send you.  Perhaps someone else out there does.
Basically, what I was going to do was cut the stick into 1 inch section.
Drill a hole the size of the shaft 1/2 inch deep.  Round / bevel the other
side.  Then put what I call a battle smurf on it.  A battle smurf is two 1
1/4 dia. dics of closed foam with a 1 1/4 inch dia. leather disc on the
front (I won't put the rear one on there now because of the UHMW).  The
combat head is tape so that the tape forms a cone behind the head.  Besure
that the distance from where the string rests to the back of the taped cone
is not more than 28 inches.

Gilli

-----Original Message-----
From: Brown Chass [mailto:dwarvenhome at yahoo.com]
Sent: Friday, April 20, 2001 3:46 PM
To: ansteorra-archery at ansteorra.org
Subject: RE: ARCH - Enough is enough


Gilli can i ask a favor?? Can you send me a upclose
pic of the head on a uhmw arrow? Am very curious have
ordered 4, 6 foot sticks of 1 1/4" Uhmw. Also where do
yall buy your fiberglass shafts?

Charinthalis Del Sans
============================================================================
Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.