ARCH - Fw: Test results 160 siloflex and wood shafts
Dave Pearcy
dpearcy at telusplanet.net
Fri Apr 27 21:56:13 PDT 2001
Greetings Lord Eadric
In response to your questions:
The two that I've made are very stable in flight!
We use 1 1/2 UHMW tapered blunts with 1/2 inch foam on the tip.
At the distance of 15 paces, they strike about a half inch lower on the target.
I live in a city and have not had time to get out to the country to test. Will
do so on Sunday!
I've tried two different lengths 1/2 and 3/4 inch top measurement. I like the
shorter one better ... same flight characteristics but lighter. Both were shot
out of a 595 inch pound crossbow.
I will continue to work on this problem to find an easy to assemble solution. I
have not been able to find a glue that will stick to polyethylene. Any ideas?
YIS
Lord Deicyn Moel
Acting Master of Arrows, Barony of Borealis
Principality of Avacal, An Tir
Eadric Anstapa wrote:
> How well do they fly?
>
> What types of blunts do you have?
>
> Have you compared flight distance to fletched shafts?
>
> Have you checked slightly longer tubes to compare flight characteristics?
>
> The more data the better.
>
> Regards,
>
> Lord Eadric Anstapa
> Coastal Regional Archery Marshal, Ansteorra
> eadric at scabrewer.com
>
> ----- Original Message -----
> From: "Dave Pearcy" <dpearcy at telusplanet.net>
> To: <ansteorra-archery at ansteorra.org>
> Sent: Friday, April 27, 2001 9:40 PM
> Subject: Re: ARCH - Fw: Test results 160 siloflex and wood shafts
>
> > Greetings Gilli
> >
> > I to have been experimenting with the siloflex ABD on my crossbow bolts.
> I'm
> > only using 1/2 inch (top) piece of tube and attaching it with waxed
> polyester
> > string to the fiberglass shafts. It works! I have two photo's I could send
> you
> > if you'd like to see? ~300K in size
> >
> > Deicyn
>
> ============================================================================
> Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.
============================================================================
Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.
More information about the Ansteorra-archery
mailing list