ARCH - UHMW

[Dewart, Charles R. --G3 Contractor (Anteon Corp)]

Would you really need to bevel the head if you had a leather disc there, IE
the bottom of a Battle Smurf?

Gilli


I just tried to bevel UHMW with my belt sander and it works you get lots of
snow and the finished product is fuzzy, but that may be becouse of the grit
belt I am using (80) IIRC Sir Jon said use a grinder. It is important that
the shaft be a force fit into the hole in the head as I used the shaft to
hold the heads when cutting the radius with my router and could/would do the
same if beveling the back side of the head.
Plachoya Sobaka insignificant archer; Ravens Fort, Kingdom of Ansteorra
============================================================================
Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.