[Ansteorra-archery] Greetings and website

Pug Bainter pug at pug.net
Sat Nov 23 06:29:52 PST 2002

I'm still catching up.

> On UHMW Heads.  Try NOT to drill a 0.25" hole.  As you mentioned, no
> affordable glue will adhere to UHMW so it needs to be fastened mechanically.
> The recommendation from the guy who created and approved the design (Sir
> Jon) was to drill a 15/16 hole.  You then drive the UHMW on with a dead-blow
> hammer.  Once you do this it is almost impossible to get the UHMW off.

I'm having problems with the math here.

.25" is 1/4 is 4/16
15/16 is almost 1"

If it was supposed to be 5/16, that will be *larger* than .25".


Pug Bainter                                        |        AMD, Inc.
System Engineer, MTS                               |      Mail Stop 625
 Pug.Bainter at amd.com      |  pug at pug.net           |  5900 E. Ben White Blvd
 Phone: (512) 602-0364    |  Fax: (512) 602-6970   |     Austin, TX 78741
Note: The views may not reflect my employers, or even my own for that matter.

More information about the Ansteorra-archery mailing list