[Ansteorra-archery] UHMW Heads

[Paul Thorne]

Thanks to  all for your timely and correct answers.


HL Jean-Paul de Calmont, CAO
Kingdom Missile Marshal, Ansteorra

On Mon, Oct 6, 2008 at 9:14 PM, Mike Gideon <mg1m at swbell.net> wrote:

>
>
>
>  *This is taken from the Society Marshal page at*
> http://sca.org/officers/marshal/combat/archery/index.html
>
> **
> *Combat Archery Ammunition - (August 22, 2008)
> *Effective immediately, the following changes to equipment are required
> due to repeated incidents of helm penetrations:
>
>    - Combat Archery ammunition may have at most 1.25" thick padding on the
>    tip after taping.
>    - All UHMW & Siloflex/Rubber Stopper ammunition must have a side wrap
>    of foam added that brings the total diameter of the blunt to at least 1.5"
>    after taping. This wrap must extend from the tip to at least 1/2" over the
>    UHMW or Siloflex itself.
>    - All fletches on any arrows, bolts, or thrown weapons can project no
>    further than 1/2" from the shaft, or must be 1.5" thick.
>
> Michel mac Donnchaid
> NR Archery Marshal
>
> ----- Original Message ----
> From: Brandon McDermott <brandonsmcd at yahoo.com>
> To: Archery within the Kingdom of Ansteorra <
> ansteorra-archery at lists.ansteorra.org>
> Sent: Monday, October 6, 2008 8:33:18 PM
> Subject: [Ansteorra-archery] UHMW Heads
>
>   Can I use 1 1/2" UHMW without a wrap of foam instead of 1 1/4" with?
>
> Lochlan
>
>
> _______________________________________________
> Ansteorra-archery mailing list
> Ansteorra-archery at lists.ansteorra.org
> http://lists.ansteorra.org/listinfo.cgi/ansteorra-archery-ansteorra.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ansteorra.org/pipermail/ansteorra-archery-ansteorra.org/attachments/20081007/dffed02f/attachment-0003.htm>