<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
You can buy 100 PSI Siloflex at most home stores and plumbing supplies,
however usually it is coiled and you will need to straighten it.
Turning coiled siloflex into shafts for bolts or arrows is sometimes a
problem because once it is coiled it wants to coil again but it is
not a problem for APDs. APDs are short enough that any set the tube
regains after straightening is negligible and unnoticeable once the APD
is securely affixed to the shaft.<br>
<br>
I am not aware of any vendors that sells premade 100 PSI siloflex APDs
but there are SCA vendors in a number of kingdoms that use siloflex
arrows and bolts that sell straight sections of 100 PSI siloflex to be
used in making tube arrows and bolts. <br>
<br>
Inga at White Wolf sells sticks of straight 100 PSI siloflex in her
online store. <a
href="http://www.argentlupus.com/CombatArcherySupplies.html">http://www.argentlupus.com/CombatArcherySupplies.html</a><br>
there may be other online vendors.<br>
<br>
Regards,<br>
-- <br>
<font size="+1">HL Eadric Anstapa</font><br>
DSEM CA<br>
<a href="mailto:eadric@scabrewer.com"><i>eadric@scabrewer.com</i></a><br>
<br>
Mike wrote:
<blockquote cite="mid4343EA8A.2060705@netzero.net" type="cite">
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
Yes, NorthStar Archery has Siloflex APD's, but they are 160 PSI. I am
looking for 100 PSI Siloflex for 28 inch combat arrows. Not interest in
adding additional weight to my combat arrows. Still think it is a bad
decision. But if I wish to play will have to change - bad!<br>
<br>
Michael Kettering<br>
<br>
<br>
Robin Allen wrote:
<blockquote
cite="mid20051005005342.14439.qmail@web80905.mail.scd.yahoo.com"
type="cite">
<div>I think the Siloflex APDs from Northstar archery are of the
proper guage and they already have the groove cut in them. </div>
<div>Robin<br>
</div>
<blockquote class="replbq"
style="border-left: 2px solid rgb(16, 16, 255); padding-left: 5px; margin-left: 5px;"><br>
Hello,<br>
<br>
A moment of your time - since only 100+ PSI Siloflex and Asgard APD's <br>
will be allowed after December 31st of this year.<br>
<br>
Who has the 100 PSI Siloflex APD's available?<br>
<br>
The only Siloflex that I have found has been in coils and not in <br>
straight units in the Dallas area. If there are local suppliers of <br>
straight Siloflex would like to know who and where they are.<br>
<br>
What type of tools required to build Siloflex APD's? (i.e., hand tools <br>
or power tools)<br>
<br>
The only Siloflex APD's that are on line that I have found is 160 PSI <br>
ones, is anyone building the lower rated Siloflex APD's?<br>
<br>
Thank you,<br>
<br>
MIchael Kettering<br>
</blockquote>
</blockquote>
</blockquote>
<br>
<div class="moz-signature"><a href="mailto:eadric@scabrewer.com"><i></i></a>
<p></p>
</div>
</body>
</html>