[Bryn-gwlad] Arrowing Making Equipment

[Ld. Alfred]

Barnet,
 It will depend on whether or not you intend to make regular arrows or crossbow bolts.  Each type has tools best suited to their specific application.
 For example, for regular arrows, I use the Arizona EZ Fletcher which allows me to mount all three fletches at the same time.  This will not work for crossbow bolts.
 For crossbow bolts, I use a bitzenberger (sp?) jig that allows me to properly fletch the bolts (two fletches, opposed).  You can also use the "bitz" for regular arrows too.
~Alfred~

----- Original Message ----
From: Bernard Wright <barnet1359 at sbcglobal.net>
To: Bryn Gwald <bryn-gwlad at lists.ansteorra.org>
Sent: Friday, November 3, 2006 10:58:01 AM
Subject: [Bryn-gwlad] Arrowing Making Equipment

I have another question on arrow making equipment, does anyone use or have a preference for a fletching jig and dipping tool? Was looking at the different one and they are all starting to look the same, it has been quit a while since I have done this and was looking for some input.
   
  sincerely,
  Barnet
   
   
_______________________________________________
Bryn-gwlad mailing list
Bryn-gwlad at lists.ansteorra.org
http://lists.ansteorra.org/listinfo.cgi/bryn-gwlad-ansteorra.org



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ansteorra.org/pipermail/bryn-gwlad-ansteorra.org/attachments/20061103/77bf4e69/attachment.html