ES - Armoring supplies
Amy and Bill Morris
awmorris at flash.net
Fri Jan 7 12:11:41 PST 2000
The rules state: "riveted with solid iron or steel rivets no less than
1/8-inch (3.2 mm) in
thickness spaced no greater than 2 inches (5.1 cm) apart. Rivets that
are 3/16 inch (4.8 mm) or greater in thickness may be placed up to
2-1/2 inches (6.5 cm) apart."
This is because we like you as you are, speaking clearly, and not bleeding.
Mableth
----- Original Message -----
From: <forvalaka at juno.com>
To: <elfsea at Ansteorra.ORG>
Sent: Friday, January 07, 2000 10:40 AM
Subject: Re: ES - Armoring supplies
> Thankyou everyone for the information. I have scheduled a trip to The
> Leather Factory for today and I am ordering rivets.
>
> BTW, are copper solid rivets acceptable for helmet construction? That
> would be a very interesting look.
>
>
> Charles O. Baucum Jr.
>
> Mortuus non est quod in aeternum insiditur
> et aetate ignota mors ipsas finiretur
>
============================================================================
> Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.
>
============================================================================
Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.
More information about the Elfsea
mailing list