[Gatesedge] OT: Open Production Positions, NW Houston
Steve Scott (Dietrich)
dietrich.strobelbart at yahoo.com
Wed Nov 9 10:07:42 PST 2011
We have a few open production line positions where I work. Located at US-290 and Pinemont. Tell them you were referred by Steve Scott.
Herr Dietrich Strobelbart
Per bend argent and gules, a cock contourny counterchanged.
mka: Steve Scott
Numerus vestri pluma!
Number your feathers!
----- Forwarded Message -----
>From:Lacey Rice [mailto:lrice at oyogeospace.com]
>Sent: Tuesday, November 08, 2011 1:37 PM
>Subject: Open Production Positions
>If you know someone who might be interested in one of these openings, please have them send a resume to Recruiter at oyogeospace.com
>Or send a resume by fax to 713 986 8721.
>Quality Control Techs – 2
> Water Testers – 12 months work experience in a manufacturing operation. (This involves testing products in a water bath to insure they don't leak)
>SMT Operator – 1
> Requires at least 12 months experience operating a variety of machines in an SMT production line. Daily activities include operating machines, housekeeping in and around the work area, including vacuuming the interior of the machine; inspect work to ensure quality; report low or expired inventory on flux, solder paste, and alcohol to the dept manager or designated person.
> SMT training certificate is a plus but not required.
>Soldering for Geophones – 4
> At least 12 months experience soldering very small wires. PC Board rework background would be a plus.
> Candidates will be required to demonstrate the ability to read and act upon written instructions, and will be required to solder geophones for a 30 minute period (minimum). Samples will be tested (pass/fail) for electrical conductivity.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Gatesedge