[Gatesedge] OT: Open Production Positions, NW Houston

[Steve Scott (Dietrich)]

We have a few open production line positions where I work.  Located at US-290 and Pinemont.  Tell them you were referred by Steve Scott.


YIS,

Herr Dietrich Strobelbart
Per bend argent and gules, a cock contourny counterchanged.
 
mka: Steve Scott 
281-731-7726 Cell
Numerus vestri pluma!
Number your feathers!





----- Forwarded Message -----
>
>
>From:Lacey Rice [mailto:lrice at oyogeospace.com] 
>Sent: Tuesday, November 08, 2011 1:37 PM
>To: All-Houston
>Subject: Open Production Positions
> 
>All Employees
> 
>If you know someone who might be interested in one of these openings, please have them send a resume to Recruiter at oyogeospace.com
>Or send a resume by fax to 713 986 8721.
> 
> 
>Quality Control Techs – 2 
>            Water Testers – 12 months work experience in a manufacturing operation.  (This involves testing products in a water bath to insure they don't leak)
>
> 
>SMT Operator – 1
>            Requires at least 12 months experience operating a variety of machines in an SMT production line.  Daily activities include operating machines, housekeeping in and around the work area, including vacuuming the interior of the machine; inspect work to ensure quality; report low or expired inventory on flux, solder paste, and alcohol to the dept manager or designated person.
>            SMT training certificate is a plus but not required.  
> 
>Soldering for Geophones – 4 
>            At least 12 months experience soldering very small wires.  PC Board rework background would be a plus.
>            Candidates will be required to demonstrate the ability to read and act upon written instructions, and will be required to solder geophones for a 30 minute period (minimum).  Samples will be tested (pass/fail) for electrical conductivity.
> 
> 
> 
> 
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ansteorra.org/pipermail/gatesedge-ansteorra.org/attachments/20111109/cbad3c39/attachment-0001.htm>