[Loch-Ruadh] Funeral Ship

[Julie Self]

We've used luan plywood and it is very flexible and REALLY GORGEOUS when given any kind of finish, even Pledge!  Sorry no plans here.

Loch Ruadh Rocks! 

Beam me sideways, Scottie. These people don't know which way is up!

 > Date: Fri, 8 Jul 2011 23:41:23 -0700
> From: wosterheim at yahoo.com
> To: loch-ruadh at lists.ansteorra.org
> Subject: Re: [Loch-Ruadh] Funeral Ship
> 
> Actual plans, no... but if memory is right, I think the 8 foot one Hakon led us 
> in building 15 years ago used 4" strips of 1/4" plywood for the sides,
> so I would think abotu 2 or 2.5 inch side strips of 1/8" luan plywood would 
> work. If you get them too wide, you cannot bend them around correctly.
> Probably on that size, Get some 1" stock to make the keel and bow and stern out 
> of. It will need to be wider than you might think to start it up for 
> 
> the end curves.
> Polydore
> 
> 
> 
> 
> 
> ________________________________
> From: Roy Baker <palehorse at mail.com>
> To: loch-ruadh at lists.ansteorra.org
> Sent: Fri, July 8, 2011 11:13:41 PM
> Subject: [Loch-Ruadh] Funeral Ship
> 
> Will be building a small scale viking funeral ship in honor of my departed 
> brother Hakon.
> 
> Does anyone have the plans or access to one for this project? If so, please 
> contact me ASAP.
> This will be a very small build (No more that 3-4 ft in length) due to the 
> location of the ceremony.
> 
> Thank you all for your assistance,
> Tryggvald Thorirson
> (Roy Baker)
> _______________________________________________
> Loch-Ruadh mailing list
> Loch-Ruadh at lists.ansteorra.org
> http://lists.ansteorra.org/listinfo.cgi/loch-ruadh-ansteorra.org
> _______________________________________________
> Loch-Ruadh mailing list
> Loch-Ruadh at lists.ansteorra.org
> http://lists.ansteorra.org/listinfo.cgi/loch-ruadh-ansteorra.org