No subject

4'x8'x5/8" plywood @ $11.29 x 35 = $395.15
4"x4"x8' pressure treated @$3.95 x 24 =$94.80
4-6 pair hinges for the gate
24 "portable holes" that hold 4"x4"s
We could use deck screws (cheaper) or lag screws (stronger/easier to
remove)
10 gals primer
10 gals paint per coat

This will build a square fort that is 54'x54' with a 6' wide gate that
is 8' deep. The walls would be at least 6 ft high at the top. This can
be made higher by setting the bottom of the up off the ground. Alton has
suggested that the wall be set up on a berm. This would require some
landscaping. Any other ideas or suggestions?