[Ravensfort] tree parts

[David Brown]

even if we did not make the entire thrones out of the tree, we could dry some out and make raven shaped embellishments for thrones and other things.
 
devin

--- On Fri, 8/28/09, Eadric Anstapa <eadric at scabrewer.com> wrote:


From: Eadric Anstapa <eadric at scabrewer.com>
Subject: Re: [Ravensfort] tree parts
To: 
Cc: "ravensfort" <ravensfort at ansteorra.org>
Date: Friday, August 28, 2009, 1:47 PM


Reading this thread with interest.

I have a chainsaw mill.  See pics of us using it here.   http://www.companystsebastian.net/timber/

With this you don't haul the logs off.  You mill it in place.  It's hard but rewarding work.

Cut the logs into manageable sections.  8 ft is a good choice.

If they are going to sit long at all get em up off the ground to avoid wet and insects.  rolling them up on some created 4x4's is enough.

Paint the ends of the logs.  You do this so they wont dry too quickly and split.  The best thing to paint the end of the logs with (other than a commercial sealer intended for this job) is some of the aluminum roof sealant that you can buy at your local home improvement store.

Mill em as soon as ya can and then stack them in a barn to dry.  They tell ya to figure on one year for each inch of thickness to air dry. 

-EA


David Brown wrote: 





great idea. we could call them the Dreaming Thrones.
 
devin

--- On Fri, 8/28/09, Cathal SilAlmhain <silalmhain at yahoo.com> wrote:


From: Cathal SilAlmhain <silalmhain at yahoo.com>
Subject: [Ravensfort] tree parts
To: "ravensfort" <ravensfort at ansteorra.org>
Date: Friday, August 28, 2009, 9:34 AM



I have a friend
> that has a lumber mill and can cut the tree in to planks if
> we can get it to his mill.
>  
> Brian  

Which is an excellent idea.  

I think  that we should cut two 6-foot sections of the trunk and roll them off somewhere to cure for about a year or so . . . then, get out a chainsaw and other tools of woody destruction/modification, and make two baronial thrones . . . now THAT would be COOL . .. 

Now, if anyone up there actually wants to put this into practice, then I would suggest that you cut it into as many 4.5, 5, or 6-foot sections as you can get the trunk into, that way you will have as many "backup" sections of tree trunk as the tree will afford, just in case of snafus will your "primary" two . . .

Cathal


      
_______________________________________________
Ravensfort mailing list
Ravensfort at lists.ansteorra.org
http://lists.ansteorra.org/listinfo.cgi/ravensfort-ansteorra.org


_______________________________________________
Ravensfort mailing list
Ravensfort at lists.ansteorra.org
http://lists.ansteorra.org/listinfo.cgi/ravensfort-ansteorra.org
  

-----Inline Attachment Follows-----


_______________________________________________
Ravensfort mailing list
Ravensfort at lists.ansteorra.org
http://lists.ansteorra.org/listinfo.cgi/ravensfort-ansteorra.org



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ansteorra.org/pipermail/ravensfort-ansteorra.org/attachments/20090828/16cabffb/attachment-0005.htm>