SC - Fw: [Mid] Crown feedback/coffee
Decker, Terry D.
TerryD at Health.State.OK.US
Wed Oct 7 04:20:12 PDT 1998
I made a cauldron myself from mild steel, and used the porridge method to
seal it - for the first few feasts it needed to have the water constantly
topped up, but now it is perfect.
I recall a long and technical discussion on the OldNorseNet about what
was and wasn't 'wrought iron'. So if it is something that can be welded
at red heat it would e a nice thing to be able to use. My cauldron was in
fact worked cold. Ockham's razor (not always a good historical test)
would suggest that the porridge method would be a lot easier than going
to the extra trouble of working inside a red-hot object, which is
actually wuite difficult. THe first time I made one I bent all the pieces
into shape, and then rivetted it, which was very difficult. The second
time I rivetted the centres together (I did not have bottom pieces), then
bent and rivetted as I went, which made life _MUCH_ simpler.
Charles ragnar
============================================================================
To be removed from the SCA-Cooks mailing list, please send a message to
Majordomo at Ansteorra.ORG with the message body of "unsubscribe SCA-Cooks".
============================================================================
More information about the Sca-cooks
mailing list