ANST - How to mail a scroll?

[karl muller]

if you send it flat, something as big as a scroll will very likely be 
bent. if you send it in a tube, make sure the tube cann't be crushed. 
look for a reproduction place (they make blue prints for architects and 
engineers) in your town and see if they have any tubes from roll stock 
they can give you. it's thick and sturdy and hard to cruch. just tape 
both ends, address and send.
km

>Date: Thu, 18 Feb 1999 11:23:01 -0600
>From: Amy Forsyth <aforsyth at UH.EDU>
>Subject: ANST - How to mail a scroll?
>To: ansteorra at Ansteorra.ORG
>Reply-To: ansteorra at Ansteorra.ORG
>
>
>We've found a scroll that belongs to someone who now lives in the 
Outlands.
> We've gotten in contact with the person, and have their address.....
>
>Now we need to figure out the best way to package the scroll so that it 
can
>be sent through the mail.
>
>Should it be sandwiched between 2 pieces of oversized cardboard with 
some
>tissue next to the design?
>
>What about rolling it and sending it in a tube?
>
>Suggestions?
>
>Thanks,
>Adela
>
>============================================================================
>Go to http://lists.ansteorra.org/lists.html to perform mailing list 
tasks.


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
============================================================================
Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.