ANST - How to mail a scroll?
karl muller
apophysis at hotmail.com
Thu Feb 18 13:03:51 PST 1999
if you send it flat, something as big as a scroll will very likely be
bent. if you send it in a tube, make sure the tube cann't be crushed.
look for a reproduction place (they make blue prints for architects and
engineers) in your town and see if they have any tubes from roll stock
they can give you. it's thick and sturdy and hard to cruch. just tape
both ends, address and send.
km
>Date: Thu, 18 Feb 1999 11:23:01 -0600
>From: Amy Forsyth <aforsyth at UH.EDU>
>Subject: ANST - How to mail a scroll?
>To: ansteorra at Ansteorra.ORG
>Reply-To: ansteorra at Ansteorra.ORG
>
>
>We've found a scroll that belongs to someone who now lives in the
Outlands.
> We've gotten in contact with the person, and have their address.....
>
>Now we need to figure out the best way to package the scroll so that it
can
>be sent through the mail.
>
>Should it be sandwiched between 2 pieces of oversized cardboard with
some
>tissue next to the design?
>
>What about rolling it and sending it in a tube?
>
>Suggestions?
>
>Thanks,
>Adela
>
>============================================================================
>Go to http://lists.ansteorra.org/lists.html to perform mailing list
tasks.
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
============================================================================
Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.
More information about the Ansteorra
mailing list