[Ansteorra-archery] Combat Archery Ruling
James Friend
jfriend-1 at hotmail.com
Wed Aug 20 09:21:15 PDT 2008
The sidewrap foam must extend 1/2" past the leading edge of the UHMW core
Frederic
Date: Wed, 20 Aug 2008 09:18:15 -0700From: j_hodek at yahoo.comTo: ansteorra-archery at lists.ansteorra.orgSubject: Re: [Ansteorra-archery] Combat Archery Ruling
One last, and my only question. The second requirement is that the side wrap foam padding must extend from the tip to a minimum of 1/2 inch over the UHMW itself. is this from the leading edge of the UHMW or the shaft edge? --- On Tue, 8/19/08, Paul Thorne <paul.v.thorne at gmail.com> wrote:
From: Paul Thorne <paul.v.thorne at gmail.com>Subject: [Ansteorra-archery] Combat Archery RulingTo: "Archery within the Kingdom of Ansteorra" <ansteorra-archery at lists.ansteorra.org>, "Archery Marshals in the Kingdom of Ansteorra" <am at lists.ansteorra.org>, mm at lists.ansteorra.org, "Kingdom of Ansteorra - SCA, Inc." <ansteorra at lists.ansteorra.org>Date: Tuesday, August 19, 2008, 4:36 PM
Greetings, As of this afternoon we have decided the path that Ansteorra will take with the new Society Rules concerning ammunition construction. Effective immediately all UHMW cored blunts will require a minimum of 1/2" padding and a maximum of 1" of padding. Once again here is the announcement from the Society Combat Archery Marshal;Effective immediately by the Society Earl Marshal & the Deputy Society Earl Marshal for Combat Archery, the following changes to equipment are required due to repeated incidents of helm penetrations:
Combat Archery ammunition may have at most 1" thick padding on the tip after taping.
All UHMW & Siloflex/Rubber Stopper ammunition must have a side wrap of foam added that brings the total diameter of the blunt to at least 1.5" after taping. This wrap must extend from the tip to at least 1/2" over the UHMW or Siloflex itself.
All fletches on any arrows, bolts, or thrown weapons can project no further than 1/2" from the shaft, or must be 1.5" thick.
NOTE: All Marshals need to be rigorous in their inspections of all tips (arrows & thrusting) and mass weapons. Ensure that the foam is firm, will not bend over, returns to shape when compressed, and can not be easily pushed into a legal helm more than 1/2".
________________________________________________________Siegfried Sebastian FaustSociety Combat Archery Marshal A big concern is that Gulf War requirements currently for CA is 3/4" of padding. If you plan on attending Gulf War, or even sending some arrows/bolts to Gulf Wars I would make sure that your ammunition passes that standard. They will be legal here and will be legal there. If Gulf War standards change I will send out a notification to the appropriate lists. Thank you all for your patience in letting us see this through.In Service,HL Jean-Paul de Calmont, CAOKingdom Missile Marshal, Ansteorra_______________________________________________
Ansteorra-archery mailing list
Ansteorra-archery at lists.ansteorra.org
http://lists.ansteorra.org/listinfo.cgi/ansteorra-archery-ansteorra.org
_________________________________________________________________
Get thousands of games on your PC, your mobile phone, and the web with Windows®.
http://clk.atdmt.com/MRT/go/108588800/direct/01/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ansteorra.org/pipermail/ansteorra-archery-ansteorra.org/attachments/20080820/b8417990/attachment-0003.htm>
More information about the Ansteorra-archery
mailing list