[Ansteorra-archery] Combat Archery Ruling
Eadric Anstapa
eadric at scabrewer.com
Wed Aug 20 09:21:05 PDT 2008
From the leading edge.
-EA
jim hodek wrote:
> One last, and my only question. The second requirement is that the
> side wrap foam padding must extend from the tip to a minimum of 1/2
> inch over the UHMW itself. is this from the leading edge of the UHMW
> or the shaft edge?
>
> --- On *Tue, 8/19/08, Paul Thorne /<paul.v.thorne at gmail.com>/* wrote:
>
> From: Paul Thorne <paul.v.thorne at gmail.com>
> Subject: [Ansteorra-archery] Combat Archery Ruling
> To: "Archery within the Kingdom of Ansteorra"
> <ansteorra-archery at lists.ansteorra.org>, "Archery Marshals in the
> Kingdom of Ansteorra" <am at lists.ansteorra.org>,
> mm at lists.ansteorra.org, "Kingdom of Ansteorra - SCA, Inc."
> <ansteorra at lists.ansteorra.org>
> Date: Tuesday, August 19, 2008, 4:36 PM
>
> Greetings,
>
>
> As of this afternoon we have decided the path that Ansteorra
> will take with the new Society Rules concerning ammunition
> construction. Effective immediately all UHMW cored blunts will
> require a minimum of 1/2" padding and a maximum of 1" of padding.
> Once again here is the announcement from the Society Combat
> Archery Marshal;
>
> *Effective immediately* by the Society Earl Marshal & the Deputy
> Society Earl Marshal for Combat Archery, the following changes to
> equipment are required due to repeated incidents of helm
> penetrations:
>
> * Combat Archery ammunition may have at most 1" thick padding
> on the tip after taping.
> * All UHMW & Siloflex/Rubber Stopper ammunition must have a
> side wrap of foam added that brings the total diameter of
> the blunt to at least 1.5" after taping. This wrap must
> extend from the tip to at least 1/2" over the UHMW or
> Siloflex itself.
> * All fletches on any arrows, bolts, or thrown weapons can
> project no further than 1/2" from the shaft, or must be 1.5"
> thick.
> * NOTE: All Marshals need to be rigorous in their inspections
> of all tips (arrows & thrusting) and mass weapons. Ensure
> that the foam is firm, will not bend over, returns to shape
> when compressed, and can not be easily pushed into a legal
> helm more than 1/2".
>
> ________________________________________________________
> Siegfried Sebastian Faust
> Society Combat Archery Marshal
>
>
>
> A big concern is that Gulf War requirements currently for CA is
> 3/4" of padding. If you plan on attending Gulf War, or even
> sending some arrows/bolts to Gulf Wars I would make sure that your
> ammunition passes that standard. They will be legal here and will
> be legal there. If Gulf War standards change I will send out a
> notification to the appropriate lists. Thank you all for your
> patience in letting us see this through.
>
> In Service,
>
> HL Jean-Paul de Calmont, CAO
> Kingdom Missile Marshal, Ansteorra
>
>
> _______________________________________________
> Ansteorra-archery mailing list
> Ansteorra-archery at lists.ansteorra.org
> http://lists.ansteorra.org/listinfo.cgi/ansteorra-archery-ansteorra.org
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Ansteorra-archery mailing list
> Ansteorra-archery at lists.ansteorra.org
> http://lists.ansteorra.org/listinfo.cgi/ansteorra-archery-ansteorra.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ansteorra.org/pipermail/ansteorra-archery-ansteorra.org/attachments/20080820/54c4be64/attachment-0003.htm>
More information about the Ansteorra-archery
mailing list