[Ansteorra-archery] UHMW Heads

Mike Gideon mg1m at swbell.net
Mon Oct 6 19:14:55 PDT 2008

This is taken from the Society Marshal page at

Combat Archery Ammunition - (August 22, 2008)
Effective immediately, the following changes to equipment are required due to repeated incidents of helm penetrations: 
	* Combat Archery ammunition may have at most 1.25" thick padding on the tip after taping. 
	* All UHMW & Siloflex/Rubber Stopper ammunition must have a side wrap of foam added that brings the total diameter of the blunt to at least 1.5" after taping. This wrap must extend from the tip to at least 1/2" over the UHMW or Siloflex itself. 
	* All fletches on any arrows, bolts, or thrown weapons can project no further than 1/2" from the shaft, or must be 1.5" thick. 
Michel mac Donnchaid
NR Archery Marshal

----- Original Message ----
From: Brandon McDermott <brandonsmcd at yahoo.com>
To: Archery within the Kingdom of Ansteorra <ansteorra-archery at lists.ansteorra.org>
Sent: Monday, October 6, 2008 8:33:18 PM
Subject: [Ansteorra-archery] UHMW Heads

Can I use 1 1/2" UHMW without a wrap of foam instead of 1 1/4" with?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ansteorra.org/pipermail/ansteorra-archery-ansteorra.org/attachments/20081006/67bc0ee8/attachment.htm>

More information about the Ansteorra-archery mailing list