[Ansteorra-archery] UHMW Heads
paul.v.thorne at gmail.com
Tue Oct 7 06:09:07 PDT 2008
Thanks to all for your timely and correct answers.
HL Jean-Paul de Calmont, CAO
Kingdom Missile Marshal, Ansteorra
On Mon, Oct 6, 2008 at 9:14 PM, Mike Gideon <mg1m at swbell.net> wrote:
> *This is taken from the Society Marshal page at*
> *Combat Archery Ammunition - (August 22, 2008)
> *Effective immediately, the following changes to equipment are required
> due to repeated incidents of helm penetrations:
> - Combat Archery ammunition may have at most 1.25" thick padding on the
> tip after taping.
> - All UHMW & Siloflex/Rubber Stopper ammunition must have a side wrap
> of foam added that brings the total diameter of the blunt to at least 1.5"
> after taping. This wrap must extend from the tip to at least 1/2" over the
> UHMW or Siloflex itself.
> - All fletches on any arrows, bolts, or thrown weapons can project no
> further than 1/2" from the shaft, or must be 1.5" thick.
> Michel mac Donnchaid
> NR Archery Marshal
> ----- Original Message ----
> From: Brandon McDermott <brandonsmcd at yahoo.com>
> To: Archery within the Kingdom of Ansteorra <
> ansteorra-archery at lists.ansteorra.org>
> Sent: Monday, October 6, 2008 8:33:18 PM
> Subject: [Ansteorra-archery] UHMW Heads
> Can I use 1 1/2" UHMW without a wrap of foam instead of 1 1/4" with?
> Ansteorra-archery mailing list
> Ansteorra-archery at lists.ansteorra.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Ansteorra-archery