[Ansteorra-archery] Archery Discussion
Eric Brown
caladin at io.com
Mon Oct 6 20:21:38 PDT 2008
Yes please, I'd love to get sources for prods in that price range!
I've got 2 feet of Delrin rod, just waiting to be turned into nuts for
crossbows,
and all the tools to make em, just waiting for the time (and some
hardwood). There were a bunch interested in
making bows locally after last gulf, so I laid in supplies. :)
Caladin-
Eadric Anstapa wrote:
> If you have access to such inexpensive prods please share your
> sources. Be aware that an 80# prod may have to be significantly
> underdrawn to be legal. Likewise there may be problems with making a
> legal bow from a 50# prod.
>
> I would also be careful of of cheap fiberglass rod. Make sure it is a
> good quality linear pultruded rod. We have had problems with cheap
> quality fiberglass many times in the past.
>
> Also with all of the issues that there have bene recently with padding
> please make sure you use a good wuality padding. I recommend a 4#
> density crosslinked PE foam.
>
> If you are making it all yourself and have all the tools, even at the
> prices you list below using a siloflex APD each bolt is going to cost
> you$1.50 or more each.
>
> Regards,
>
> -EA
>
>
>
> Brandon McDermott wrote:
>> I have been talking with several of the fighters in the Elfsea area
>> about getting authorized in CA. We think we can put a crossbow
>> together with 10 bolts for around $30. I propose we all ( meaning
>> heavy fighters ) get CA authorized, walk out with swords slung , pop
>> off 3 or 4 rounds, then go back to " warin' " the old fashioned way.
>> I am working on making 10-20 of these cross bows. 50 and 80 pound
>> prods can be had for around $13.... 9 foot lengths of 1/4 in
>> fiberglass rod $6.......1 1/4 in UHMW is $2.50 per foot.... Siloflex
>> APD's are ???? .. Cheap... My point in all of this being that as a
>> heavy fighters we are (most of us LOL) aware enough not to shoot into
>> the onlookers, capabale of putting togeher the kit, and wasting
>> valuable time that we could be shooting ... STANDING?Waiting? So why
>> not get CA authorized?
>>
>> Gramercy,
>> Lochlan
>>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Ansteorra-archery mailing list
> Ansteorra-archery at lists.ansteorra.org
> http://lists.ansteorra.org/listinfo.cgi/ansteorra-archery-ansteorra.org
>
More information about the Ansteorra-archery
mailing list