[Loch-soilleir] Needing some woodwork done

[Drake Dunivan]

One end can be done with a chop saw and hand saw, the long side edges on a shaper or router with the appropriate bit, the peg end is the difficult part, because it needs to be carved out.

I am going to bring a rafter to the UofH practice.

drake

--- On Tue, 1/13/09, Dave Wise <wiselaw at comcast.net> wrote:
From: Dave Wise <wiselaw at comcast.net>
Subject: Re: [Loch-soilleir] Needing some woodwork done
To: "Loch Soilleir Announcements" <loch-soilleir at lists.ansteorra.org>
Date: Tuesday, January 13, 2009, 2:06 PM

what type of tools do you need? I've got most the standard woodworking
tools.
Alexis

-----Original Message-----
From: loch-soilleir-bounces at lists.ansteorra.org
[mailto:loch-soilleir-bounces at lists.ansteorra.org]On Behalf Of Drake
Dunivan
Sent: Tuesday, January 13, 2009 9:59 AM
To: Loch Soilleir Announcements
Subject: [Loch-soilleir] Needing some woodwork done


We are planning on bringing our yurt to Gulf War this year and we need some
rafters made for it.

Basically, need 4 rafters made out of Grade 1 Yellow pine 2x4's (not the
same as SPF or “white” pine).  I can provide a existing rafter as a
template.  I just don't have the tools to do this myself nor the skill set
at this time, though I could do one end and finish the long edges myself its
the pegged end that I can't do.

So if anyone have some time and interested in the work, let me know :P

drake




_______________________________________________
Loch-Soilleir mailing list
Loch-Soilleir at lists.ansteorra.org
http://lists.ansteorra.org/listinfo.cgi/loch-soilleir-ansteorra.org
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.10.6/1891 - Release Date: 1/13/2009
8:17 AM

_______________________________________________
Loch-Soilleir mailing list
Loch-Soilleir at lists.ansteorra.org
http://lists.ansteorra.org/listinfo.cgi/loch-soilleir-ansteorra.org