ST - corset boning

[ches at io.com]

Hey!

One of our ladies purchased saw blades and had her husband sand down the
teeth and trim each one to the size they needed to be. Since both ends are
already rounded you would only have to round one end.

The saw blades I am talking about are the long thin ones that are about 1
inch thin.

Clothiers is this week if you would like to come over and we can set you
all up in the garage to trim them, I think I have tin snips that will
work. If you have tin snips already bring them with you. :) I do have the
sand paper and files.

I have several catalogs from which you can place an order from if you want
them asap. Or you can go to
http://www.dnaco.net/~aleed/corsets/mailorder.html she had probably the
best listing of mail order catalogs on the net for this type of need.

Sincerely,
F. Havas
ches at io.com

On Mon, 20 Dec 1999, Genevieve de Courtanvaux wrote:

> Date: Mon, 20 Dec 1999 11:04:27 -0600
> From: Genevieve de Courtanvaux <gdc at airmail.net>
> Reply-To: steppes at Ansteorra.ORG
> To: steppes at Ansteorra.ORG
> Subject: Re: ST - corset boning
> 
> Stephania,
> There is no local source for metal corset boning. Unfortunatly, it has to be
> mail ordered. But if you will settle for something other than metal corset
> boning then there are plenty of options. You could go with the basic plasitc
> boning that is at the fabric stores ( I don't really recomomend this but
> since it is so close to 12th Night and that is what I am assuming you are
> making your corset for...). Or you might try going to some place like Home
> Depot and seeing if you can find a suitable replacement (I couldn't guide
> you to what exactly as I have never done this but I know that some people
> have found a suitable replacement for it).
> But if you want to try to order it try www.alteryears.com
> Good Luck,
> Genevieve
> 
> Stephanie Edwards <karmacat at usa.net>
> To: elfsea at Ansteorra.ORG <elfsea at Ansteorra.ORG>; steppes at Ansteorra.ORG
> <steppes at Ansteorra.ORG>
> Date: Monday, December 20, 1999 8:57 AM
> Subject: ST - corset boning
> 
> 
> >Does anyone know of a good, local source for corset boning?
> >
> >Thanks
> >Stephania
> >
> >____________________________________________________________________
> >Get free email and a permanent address at http://www.netaddress.com/?N=1
> >===========================================================================
> =
> >Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.
> >
> 
> ============================================================================
> Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.
> 

============================================================================
Go to http://lists.ansteorra.org/lists.html to perform mailing list tasks.